Well, it’s speedier, at least

I’ve been doing a bit of swatching this week, toying with some design ideas and playing around with colours and options. Which is also a sort of professional-looking way of saying “I’m sitting in an indecisive mess of yarn,” but then, as Annie tells me, a creative mess is better than tidy idleness, so I’ll take it.

June8-Swatching3

As I am wont to do, I’m looking at colour-work and twisted stitch cables. I have been wanting to start on some more sweaters of my own using these techniques, and finally have a bit of time to sit in the mess to do it. And then I remembered what both of these things have in common, which is how annoying it is to work them flat. Well, for me, at least. I know there are people who love doing stranded colour-work flat and don’t mind purling back in 2 colours at all, but me, I’d rather do it in the round and steek that sucker. Similarly, twisted stitch cables, or any combination of stitches worked as knits ‘through the back loop’, are a heck of a lot more fun on the knit side since purling through the back loop tends to involve mildly contorting your wrists. Ergo, I prefer it in the round if I can help it. (See: almost every sock pattern I’ve designed, ever.)

The simplest way to swatch for a project you’re going to do in the round is to do a full swatch in the round, say on DPNs or a small circular needle. Or, as knitters like Elizabeth Zimmerman and others with a voice of experience have advocated, knit a hat. It’s more useful than a swatch in the long term, and bound to fit someone when it’s done, and then you have both a hat and all your gauge information in one fell swoop. Of course, this also means taking the time and yarn quantity required for a full in-the-round undertaking, which you may not want to commit to at the time. You might actually just want a flat swatch’s worth of time and yarn. So, then, this is when you break out the ‘speed swatch’ approach. I did a whole mess of these back when I was deciding on a colour-scheme for my Venezia pullover, though at the time I didn’t know that’s what they were called and just sort of thought of them as ‘a sort of cop-out way of swatching in the round but not really.’

June8-Swatching4

What you do here is cast on enough stitches to get you a decent amount of fabric – say, 5-6 inches worth – onto a circular needle, and as you work through the swatch, when you get to the end of a row you just slide the whole works back to the front of the needle sort of like the carriage-return on a type-writer. (A circular needle is both flexible in the middle and pointy at both ends, which is why this works. Circular needles: not just for circular knitting any more!) The effect is that you are only ever knitting the Right Side of the work, so you will get a gauge reading similar to what you will actually have when knitting in the round, since knitting in the round will also only require you to work the Right Side.

The other effect is that the wrong side of your swatch will look like a big ol’ mess, since every time you start back at the beginning of the row, you leave a trail of yarn behind.

June8-Swatching2

Once you’ve done the amount of swatching you feel comfortable with, you cast off as per usual, and then get out the scissors and snip those yarny strings at the back, and then you have a flat swatch. Provided your swatch is not 100% non-wool, the strands will not unravel at the sides very quickly and you’ll be fine.

June8-Swatching1

This also works well for just plain stockinette if all you want to do is avoid the process of going in the round – say, for a sock. DPNs would work well enough in place of a circular needle, if they’re long enough to handle what you want to cast on.

When you’re done, there is naturally still the question of what to do with the swatch once you’ve finished it and gotten your gauge reading and had your way with it and don’t need it any more. But everyone likes knitted coasters, right? I thought so.

Happy swatching!

About these ads

19 Comments

Filed under design, swatching

19 responses to “Well, it’s speedier, at least

  1. tinebeest

    And for those who are still working up the nerve to steek their first piece of knitting, they serve the extra purpose of practice piece. Ideal to check which reinforcement your steek needs, and cutting this “coaster” is far less daunting.

    But yeah, I need some coasters. No really, I do!

  2. Katinka

    That’s the way I swatch in the round, too! My gauge is invariably tighter knitting in the round, so I get the most accurate results this way.

  3. kitaberry

    Instead of doing hats, I do headbands/earwarmers, which I always wear skiiing every winter and inevitable lose in the pursuit of the that activity every winter.

    I detest knitting anything that I cannot use…

  4. Can you tell me what sweater and yarn it is that you are wearing at the top of your blog page on the far right???? I think I ♥ it a little. Thanks. S

  5. That’s my ‘Basic Black’ cardigan pattern! Originally published in MagKnits, now available for free on Ravelry or on my Free Patterns page.

    G

  6. This method was first revealed to me by Ysolda Teague, but I have to say I’m not a big fan yet for two reasons.
    1. I tend to save my swatches in case I run out of yarn – then I can unravel it and sometimes get that extra few yards I was missing. So the cutting that is required here seems like a waste of good yarn to me.
    2. I found that I had to cast on quite a few more stitches, because the first few stitches on the edges (i.e. those directly next to the loose strand from the back) would be much looser than my regular gauge, so I would have to cast on say 5 extra stitches on each side and then just measure the gauge on the middle stitches.
    I would love to hear any advice you have on this…

  7. You are right that this method doesn’t allow you to pull out the swatch and reclaim the yarn – in that case the in-the-round swatch would be the one for you! I have not usually been bothered by it, since I like having the finished swatch as a reference, particularly in the case of colour-work, even after I’ve taken the gauge measurement.

    It does leave a few looser stitches at the side, but as long as you’ve got at least 4 inches’ worth of regular fabric in the middle, a normal gauge reading is still possible!

    Happy knitting Glenna

  8. I love this swatching method. Very timely blog post, I actually just did a swatch like this the other day and was thinking about how if I were clever, I would have taken some photo documentation of the process and blogged about it. Now I’ll just link to this post when I talk about the short cut for swatching in the round. Thanks Glenna!

  9. I’ve never seen this technique – thanks for sharing it!

  10. Susan

    Just curious……is it really faster for you than using 2 circs, casting on enough for the swatch fabric, plus enough to st(eeeeeK)? I’ve tried both methods and the back strands/loose stitches at the end, combine to = an inacccurate swatch, + it takes me MORE time to do the move to the other end maneuver and then cut the strands than to just work in the round. Must be me…seems similar to working an I-cord, and that took me a while to master with comfort. What am I doing wrong? PS Sachets. Not coasters. :)

  11. It’s faster for me! And it works for me for gauge as long as there is enough fabric. I must not have the same loose stitches problem that it sounds like others do.

    And, I like this sachets plan.

  12. What an incredible amount of work you are doing! Wow =)

  13. Pam

    I like the description, sitting in an indecisive mess of yarn. Been there many times. Great post about swatching for circular knitting.

  14. I swatch in the round like this. But since I like to unravel and use my swatches I leave the loops on the back long enough to flatten the swatch w/o cutting it. Might not work for everyone. Of course you have to knit a nice big swatch to avoid edge distortion.

  15. I have always knitted my ‘flat’ swatches 8 x8 inches and saved them. Eventually I stich them together for a blanket.

    I am going to try your method for circular.

  16. pbiljana

    This post was very helpful to me, I did not know about this method before. Thank you for sharing it with us!

  17. Lynda In Oregon

    “…when you get to the end of a row you just slide the whole works back to the front of the needle sort of like the carriage-return on a type-writer…”

    You *do* realize that for about half the population, that statement is going to elicit puzzlement, head-scratching, and “Huh?” ;-)

    –Lynda in Oregon
    (Feeling her Age)

  18. Lynda – I would be lying if I said that thought hadn’t crossed my mind. But then I decided to let the metaphor sit there and if it sends people to wikipedia, so much the better! ;)

    G

  19. knit mom

    Hi – what is the stitch in the solid teal-ish yarn in the last photo?